The Rinker 18QX Sterndrive is a planing bow rider for 7 passengers. Its fiberglass hull was created using vacuum infusion technology, which facilitated the weight of the vessel without losing its strength characteristics. The shipyard producing this pleasure boat with a hull length of 5.5 meters and a width of 2.26 m provides deck finishes and the ability to install additional equipment and equipment to a customer’s choice. One of the items on the optional list is the arch above the caddy-cabin with the possibility of installing a biminitope. At the stern and bow can be installed chairs on a telescopic leg for fishing.
In the bow of the boat there is a recreation area with two sunbeds along the sides, the passage to which lies through the middle compartment of the cockpit glazing. At the control post there are two sports-style seats. Immediately behind them is a semicircular sofa with special compartments for storing equipment, equipment and personal belongings of passengers. Behind the sofa is an additional seating area in the form of a soft lounger, which is the surface of the engine compartment lid. Behind the sunbed there is a bathing platform with a folding ladder for launching into the water.
On the Rinker 18QX Sterndrive, at the request of the customer, engines with different power from the MerCruiser or Volvo ranges with power up to 200 hp can be installed. A relatively small amount of fuel on board of 99 liters involves the operation of boats in the waters of rivers, lakes, reservoirs and near the coastal line.
Be the first to write a review