The Rinker 276 Captiva BR is an outdoor bow-rider that continues the Rinker Captiva series. The vessel with a fiberglass hull length of 8.9 m began to be mass-produced in 2013. Due to its size, it can be transported on a trailer on general roads. The manufacturer left the customer with a choice of deck finishes and installation of optional equipment.
In the bow of the deck there are two deck chairs, chairs, which can be reached from the midsection, if you move the middle part of the glazing of the cabin to the side. Immediately behind them is a captain’s bridge with a control console and a steering wheel. For the captain, a sports-style moving chair is installed, and the same chair is installed on the left side of the board. On the cockpit there is a semicircular sofa and a minibar mounted in the starboard side. Immediately behind the sofa there are sunbeds, which are the covers of the engine compartment and two small sunbeds on the transom with lockers for storing things and equipment. From the cockpit along the aisle between the two rest areas, you can get to the bathing platform.
At the request of the customer, the Rinker 276 Captiva BR is equipped with one of the engine options. Usually this is one MerCruiser with power from 300 to 430 hp. or Volvo Penta with power from 300 to 380 hp The maximum speed that this pleasure planing boat 43 knots can develop. With a fuel supply of 258 liters, it is expected to operate the vessel within the sea coastline, as well as on lakes, reservoirs and rivers.
Be the first to write a review